Nusoft OAP-201p Access Point Product Specifications

Hardware Specifications
Mounting		Wall, Pole
LED Indicators		WiFi x 1, Ethernet x 2
Wireless Standards		Wi-Fi 4(IEEE 802.11b/g/n)
Reset Switch		Push-button momentary contact switch
Power Supply		PoE Power Supply AC Input: 100-240V, 0.5A@50/60Hz DC Output: 24V/0.5A, 12W
Antenna		2T2R internal directional antenna (7.76dBi, horizontal: 60, vertical: 60)
Ethernet Ports		2 x 10/100Mbps Ethernet ports IEEE 802.3, 802.3u compliant CSMA/CD 10/100/1000 auto-sensing Power over Ethernet
Operating / Storage Temperature		-20〜50℃（-4〜122℉） / -40〜70℃（-40〜158℉）
Operating / Storage Humidity		0~90% Non-Condensing / 0~90% Non-Condensing
Flammability Rating / ESD Protection		UL94-V0 / 2 KV
Dimensions (diameter, H)		18 x 9 x 3.45 cm (7.09 x 3.54 x 1.36 in.)
Certifications		NCC、BSMI
Wireless Specifications
Frequency Band		2.4GHz
Data Transfer Rate		IEEE802.11b： 1 / 2 / 5.5 / 11 Mbps（Auto-sensing） IEEE802.11g： 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps（Auto-sensing） IEEE802.11n： 270 Mbps（40MHz），130 Mbps（20MHz）
Channel Width		IEEE802.11b / g：20 MHz IEEE802.11n：20 / 40 MHz
Transmit Power		2.4G：24 dBm
Frequency Response		±1 dB
Receiver Sensitivity		2.4G: IEEE802.11b：-85 dBm@11 Mbps IEEE802.11g：-69 dBm@54 Mbps IEEE802.11n：-66dBm@65Mbps IEEE802.11n：-64dBm@135Mbps
No. of Supported SSIDs		8 個
No. of Associated Clients per AP		64 個
Wireless Security		Open System / Shared Key / 802.1x / WPA / WPA2

Wireless Client Management(Only applicable to tunnel mode)	SSID-based Management
	Access Privilege
	Web Filtering
	Application Blocking
	QoS
Operation Mode	AP
	Repeater
	WDS Root AP
	WDS Station
	Mesh
AP Auto-Configuration
Connection Status Notification
Push Firmware
E-MAP
AP Load Balancing
Auto Transmit Power Control
AP Group Management
Rogue AP Detection
RADIUS Authentication
Captive Portal Authentication
Wi-Fi Billing
Dedicated APP
Client Isolation
Hardware Watchdog