Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type)
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
Under Mail Security > Configuration > Settings, the "Max. Deliveries per SMTP-Auth account per minute" and "Max. Recipients per SMTP-Auth account per minute" settings are newly added.
Under Mail Security > Configuration > Mail Notice, now you can set up to 36 mail notice time.
Under Mail Security > Anti-Spam > Settings, now you can configure the settings to verify sender's IP with real-time block list.
The system starts sending license expiration notification of Cyren to the network administrator 7 days before license expiration.
Under Mail Security > Mail Reports > Logs, now the matched rule is shown in the "Attribute" column.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The anti-spam mechanism now makes responses to the first domain name instead of local. host string.
The way of downloading ClamAV virus has been adjusted.
The Facebook Test Page has been canceled.
UTM-850
Version V8.12
| Size 32.6 MB
MD5 Checksum a33d37529e65a1b617f92112f92df54f
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type)
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added..
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
Under Mail Security > Configuration > Settings, the "Max. Deliveries per SMTP-Auth account per minute" and "Max. Recipients per SMTP-Auth account per minute" settings are newly added.
Under Mail Security > Configuration > Mail Notice, now you can set up to 36 mail notice time.
Under Mail Security > Anti-Spam > Settings, now you can configure the settings to verify sender's IP with real-time block list.
The system starts sending license expiration notification of Cyren to the network administrator 7 days before license expiration.
Under Mail Security > Mail Reports > Logs, now the matched rule is shown in the "Attribute" column.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
The "SSL Security Level" setting is newly added under Web App Firewall > Configuration > Settings.
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The anti-spam mechanism now makes responses to the first domain name instead of local. host string.
The way of downloading ClamAV virus has been adjusted.
The Facebook Test Page has been canceled.
UTM-1600
Version V8.12
| Size 32.6 MB
MD5 Checksum b685046d303dc204057bcbf6abfbb49a
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type)
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added..
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
Under Mail Security > Configuration > Settings, the "Max. Deliveries per SMTP-Auth account per minute" and "Max. Recipients per SMTP-Auth account per minute" settings are newly added.
Under Mail Security > Configuration > Mail Notice, now you can set up to 36 mail notice time.
Under Mail Security > Anti-Spam > Settings, now you can configure the settings to verify sender's IP with real-time block list.
The system starts sending license expiration notification of Cyren to the network administrator 7 days before license expiration.
Under Mail Security > Mail Reports > Logs, now the matched rule is shown in the "Attribute" column.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
The "SSL Security Level" setting is newly added under Web App Firewall > Configuration > Settings.
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The anti-spam mechanism now makes responses to the first domain name instead of local. host string.
The way of downloading ClamAV virus has been adjusted.
The Facebook Test Page has been canceled.
UTM-2600
Version V8.12
| Size 45.1 MB
MD5 Checksum ed746a67c2a2751a036bd3570c3b7c98
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type)
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
Under Mail Security > Configuration > Settings, the "Max. Deliveries per SMTP-Auth account per minute" and "Max. Recipients per SMTP-Auth account per minute" settings are newly added.
Under Mail Security > Configuration > Mail Notice, now you can set up to 36 mail notice time.
Under Mail Security > Anti-Spam > Settings, now you can configure the settings to verify sender's IP with real-time block list.
The system starts sending license expiration notification of Cyren to the network administrator 7 days before license expiration.
Under Mail Security > Mail Reports > Logs, now the matched rule is shown in the "Attribute" column.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
"SSL Inspection" is newly added under DNS/ Web Filter > Configuration > SSL Inspection, this function can enhance your web filtering. (The certificate needs to be downloaded first. In addition, please configure the settings to avoid certain websites or APP being blocked, e.g., Line.)
The "SSL Security Level" setting is newly added under Web App Firewall > Configuration > Settings.
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The anti-spam mechanism now makes responses to the first domain name instead of local. host string.
The way of downloading ClamAV virus has been adjusted.
The Facebook Test Page has been canceled.
UTM-2700
Version V8.12
| Size 45.1 MB
MD5 Checksum 49834f1176d43cb97ca5bea1f37cf9ba
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type)
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
Under Mail Security > Configuration > Settings, the "Max. Deliveries per SMTP-Auth account per minute" and "Max. Recipients per SMTP-Auth account per minute" settings are newly added.
Under Mail Security > Configuration > Mail Notice, now you can set up to 36 mail notice time.
Under Mail Security > Anti-Spam > Settings, now you can configure the settings to verify sender's IP with real-time block list.
The system starts sending license expiration notification of Cyren to the network administrator 7 days before license expiration.
Under Mail Security > Mail Reports > Logs, now the matched rule is shown in the "Attribute" column.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
"SSL Inspection" is newly added under DNS/ Web Filter > Configuration > SSL Inspection, this function can enhance your web filtering. (The certificate needs to be downloaded first. In addition, please configure the settings to avoid certain websites or APP being blocked, e.g., Line.)
The "SSL Security Level" setting is newly added under Web App Firewall > Configuration > Settings.
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The anti-spam mechanism now makes responses to the first domain name instead of local. host string.
The way of downloading ClamAV virus has been adjusted.
The Facebook Test Page has been canceled.
UTM-3700
Version V8.12
| Size 45.1 MB
MD5 Checksum b3064ad21a14cdfa38a5d9759bf3d2ab
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type)
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
Under Mail Security > Configuration > Settings, the "Max. Deliveries per SMTP-Auth account per minute" and "Max. Recipients per SMTP-Auth account per minute" settings are newly added.
Under Mail Security > Configuration > Mail Notice, now you can set up to 36 mail notice time.
Under Mail Security > Anti-Spam > Settings, now you can configure the settings to verify sender's IP with real-time block list.
The system starts sending license expiration notification of Cyren to the network administrator 7 days before license expiration.
Under Mail Security > Mail Reports > Logs, now the matched rule is shown in the "Attribute" column.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
"SSL Inspection" is newly added under DNS/ Web Filter > Configuration > SSL Inspection, this function can enhance your web filtering. (The certificate needs to be downloaded first. In addition, please configure the settings to avoid certain websites or APP being blocked, e.g., Line.)
The "SSL Security Level" setting is newly added under Web App Firewall > Configuration > Settings.
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The anti-spam mechanism now makes responses to the first domain name instead of local. host string.
The way of downloading ClamAV virus has been adjusted.
The Facebook Test Page has been canceled.
MHG-2600
Version V8.12
| Size 42.4 MB
MD5 Checksum c46914808f0741816a46dbc931b7a7fd
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type).
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
"SSL Inspection" is newly added under DNS/ Web Filter > Configuration > SSL Inspection, this function can enhance your web filtering. (The certificate needs to be downloaded first. In addition, please configure the settings to avoid certain websites or APP being blocked, e.g., Line.)
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The Facebook Test Page has been canceled.
MHG-3600
Version V8.12
| Size 42.4 MB
MD5 Checksum fc95f9c06a46d41fc4021028427774a5
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type).
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
"SSL Inspection" is newly added under DNS/ Web Filter > Configuration > SSL Inspection, this function can enhance your web filtering. (The certificate needs to be downloaded first. In addition, please configure the settings to avoid certain websites or APP being blocked, e.g., Line.)
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The Facebook Test Page has been canceled.
NFW-460
Version V8.12
| Size 39 MB
MD5 Checksum d9775dda9f402a8b4bd908678ef45a09
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type).
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The Facebook Test Page has been canceled.
NFW-520
Version V8.12
| Size 39 MB
MD5 Checksum c883fdc84be927b200df43370e5d32fc
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type).
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The Facebook Test Page has been canceled.
NFW-560
Version V8.12
| Size 39 MB
MD5 Checksum a40ed5a279a1e1e98b98e8cfb9453a06
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type).
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The Facebook Test Page has been canceled.
NFW-650
Version V8.12
| Size 32.6 MB
MD5 Checksum 22f045e00d01631353289e832f2ab522
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type).
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The Facebook Test Page has been canceled.
NFW-850
Version V8.12
| Size 32.6 MB
MD5 Checksum ec935d74840bdb9de4a67781bf4c3f4a
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type).
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
"SSL Inspection" is newly added under DNS/ Web Filter > Configuration > SSL Inspection, this function can enhance your web filtering. (The certificate needs to be downloaded first. In addition, please configure the settings to avoid certain websites or APP being blocked, e.g., Line.)
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The Facebook Test Page has been canceled.
NFW-1600
Version V8.12
| Size 32.6 MB
MD5 Checksum cee8078c3cd51a3aa38774a7e5cac9e0
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Added:
SNMP is newly added under System > Administration > Permitted IPs.
The "SSL Security Level" setting is newly added under System > Configuration > Settings.
Under Policy Object > Address > LAN/ DMZ, now the address type can be defined by "Country Code" or "Vendor ID". (Applicable to MAC Address Type).
Under Policy Object > VPN > IPSec Autokey, IKEv2 protocol is newly added.
Under Policy Object > VPN > PPTP Server, "Disable PPTP client NAT mode" and "Disable repeated connection requests from the same username" settings are newly added.
Under Policy Object > VPN > L2TP Server, "Disable L2TP client NAT mode" is newly added. And, now you can configure the settings to block the IP address after their unsuccessful login attempts. Besides, iOS 14 now is supported.
The system starts sending license expiration notification of Category to the network administrator 7 days before license expiration.
"SSL Inspection" is newly added under DNS/ Web Filter > Configuration > SSL Inspection, this function can enhance your web filtering. (The certificate needs to be downloaded first. In addition, please configure the settings to avoid certain websites or APP being blocked, e.g., Line.)
The "Description" column is newly added under AP Controller > Configuration > Wireless MAC Filtering.
"DNS Security Extensions (DNSSEC)" is newly added under Advanced > Inbound Balancing > Settings.
Under Monitoring > Accounting Reports > Today's Top Chart/ Historical Top Chart, the information of downloaded and uploaded traffic now can be displayed.
Fixed :
The known system issue has been fixed.
The Facebook Test Page has been canceled.
NAP-250
Version V3.12
| Size 7.31 MB
MD5 Checksum e707d84d643128c43271b65cb2beafea
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Note: The new firmware version is not compatible with the previous one. Thus, please back up your system configuration prior to the upgrade in case any downgrade is performed in the future.
Fixed :
Unable to redirect authenticated user to the welcome page. (Using software-based AP controller.)
Unable to obtain IP addresses via vLAN. (Using hardware-based AP controller.)
Unable to use wireless MAC filtering properly. (Using hardware-based AP controller.)
MLS-600
Version V17.04
| Size 56.5 MB
MD5 Checksum fb07139808ab71f5c6f97ea3ee807b3c
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Caution: *Downgrading to an old version will damage e-mail accounts and contacts. Also note that the device needs to be reset to factory default after downgraded.
*The configuration file is only compatible with its original firmware version (from which it is exported). Please import the original firmware version after any downgrade.
Added:
Web Mail users now can create a HTML email signature under Web Mail > Preferences > Account Settings.
Under Mail Management > Configuration > Mail Signature, now you can create mail signatures for each domain name.
The password generator is newly added under Mail Management > Account Management > Individual.
The new type "CAA (Certification Authority Authorization)" is added under DNS Settings > Settings./li>
Under Monitoring > Event Log, the search results can be downloaded as a .txt file for future reference.
Under Monitoring > Failed Login IP, now you can unblock the IP by removing it from the record list.
Fixed :
The known system errors are fixed.
The security vulnerability of web mail is fixed: bypassing normal authentication and downloading suspicious files by using backdoors.
MLS-650
Version V17.04
| Size 28 MB
MD5 Checksum 59623b2ad6a239d8fd6f18bd448f3ae1
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Caution: *Downgrading to an old version will damage e-mail accounts and contacts. Also note that the device needs to be reset to factory default after downgraded.
*The configuration file is only compatible with its original firmware version (from which it is exported). Please import the original firmware version after any downgrade.
Added:
Web Mail users now can create a HTML email signature under Web Mail > Preferences > Account Settings.
Under Mail Management > Configuration > Mail Signature, now you can create mail signatures for each domain name.
The password generator is newly added under Mail Management > Account Management > Individual.
The new type "CAA (Certification Authority Authorization)" is added under DNS Settings > Settings./li>
Under Monitoring > Event Log, the search results can be downloaded as a .txt file for future reference.
Under Monitoring > Failed Login IP, now you can unblock the IP by removing it from the record list.
Fixed :
The known system errors are fixed.
The security vulnerability of web mail is fixed: bypassing normal authentication and downloading suspicious files by using backdoors.
MLS-700
Version V17.04
| Size 24.6 MB
MD5 Checksum 938a1d5e87038e22d73436c1fb10db41
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Caution: *Downgrading to an old version will damage e-mail accounts and contacts. Also note that the device needs to be reset to factory default after downgraded.
*The configuration file is only compatible with its original firmware version (from which it is exported). Please import the original firmware version after any downgrade.
Added:
The virus scan engine, Avira, is newly added under Mail Security > Anti-Virus > Settings.
Under Monitoring > Event Log, the search results can be downloaded as a .txt file for future reference.
Fixed :
The known system errors are fixed.
The security vulnerability of web mail is fixed: bypassing normal authentication and downloading suspicious files by using backdoors.
MLS-850
Version V17.04
| Size 28 MB
MD5 Checksum 574bb059ea93fd72303ccbc8320b8862
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Caution: *Downgrading to an old version will damage e-mail accounts and contacts. Also note that the device needs to be reset to factory default after downgraded.
*The configuration file is only compatible with its original firmware version (from which it is exported). Please import the original firmware version after any downgrade.
Added:
Web Mail users now can create a HTML email signature under Web Mail > Preferences > Account Settings. (Gmail-like version)
Under Mail Management > Configuration > Mail Signature, now you can create mail signatures for each domain name.
The password generator is newly added under Mail Management > Account Management > Individual.
The new type "CAA (Certification Authority Authorization)" is added under DNS Settings > Settings.
Under Monitoring > Event Log, the search results can be downloaded as a .txt file for future reference.
Under Monitoring > Failed Login IP, now you can unblock the IP by removing it from the record list.
Fixed :
The known system errors are fixed.
The security vulnerability of web mail is fixed: bypassing normal authentication and downloading suspicious files by using backdoors.
MLS-900
Version V17.04
| Size 24.6 MB
MD5 Checksum c0ec927fb1d155c9f045ba762d1c156d
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Caution: *Downgrading to an old version will damage e-mail accounts and contacts. Also note that the device needs to be reset to factory default after downgraded.
*The configuration file is only compatible with its original firmware version (from which it is exported). Please import the original firmware version after any downgrade.
Added:
The virus scan engine, Avira, is newly added under Mail Security > Anti-Virus > Settings.
Under Monitoring > Event Log, the search results can be downloaded as a .txt file for future reference.
Fixed :
The known system errors are fixed.
The security vulnerability of web mail is fixed: bypassing normal authentication and downloading suspicious files by using backdoors.
MLS-1600
Version V17.04
| Size 28 MB
MD5 Checksum 7d504610376ff360d289637c64419155
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Caution: *Downgrading to an old version will damage e-mail accounts and contacts. Also note that the device needs to be reset to factory default after downgraded.
*The configuration file is only compatible with its original firmware version (from which it is exported). Please import the original firmware version after any downgrade.
Added:
Web Mail users now can create a HTML email signature under Web Mail > Preferences > Account Settings. (Gmail-like version)
Under Mail Management > Configuration > Mail Signature, now you can create mail signatures for each domain name.
The password generator is newly added under Mail Management > Account Management > Individual.
Remote Backup feature is newly added which can shorten the downtime due to system failure.
The new type "CAA (Certification Authority Authorization)" is added under DNS Settings > Settings.
Under Monitoring > Event Log, the search results can be downloaded as a .txt file for future reference.
Under Monitoring > Failed Login IP, now you can unblock the IP by removing it from the record list.
Fixed :
The known system errors are fixed.
The security vulnerability of web mail is fixed: bypassing normal authentication and downloading suspicious files by using backdoors.
MLS-2600
Version V17.04
| Size 37.2 MB
MD5 Checksum c41e05ac555383c10853595aa021f715
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Caution: *Downgrading to an old version will damage e-mail accounts and contacts. Also note that the device needs to be reset to factory default after downgraded.
*The configuration file is only compatible with its original firmware version (from which it is exported). Please import the original firmware version after any downgrade.
Added:
Web Mail users now can create a HTML email signature under Web Mail > Preferences > Account Settings. (Gmail-like version)
Under Mail Management > Configuration > Mail Signature, now you can create mail signatures for each domain name.
The password generator is newly added under Mail Management > Account Management > Individual.
Remote Backup feature is newly added which can shorten the downtime due to system failure.
The new type "CAA (Certification Authority Authorization)" is added under DNS Settings > Settings.
Under Monitoring > Event Log, the search results can be downloaded as a .txt file for future reference.
Under Monitoring > Failed Login IP, now you can unblock the IP by removing it from the record list.
Fixed :
The known system errors are fixed.
The security vulnerability of web mail is fixed: bypassing normal authentication and downloading suspicious files by using backdoors.
MLS-2700
Version V17.04
| Size 37.2 MB
MD5 Checksum 8034d64366ffa2d6549202d395f10fd6
Note: Verify the MD5 checksum of the downloaded file with a MD5 sum checker (e.g.MD5summer) to see if it matches the one provided above.
Caution: *Downgrading to an old version will damage e-mail accounts and contacts. Also note that the device needs to be reset to factory default after downgraded.
*The configuration file is only compatible with its original firmware version (from which it is exported). Please import the original firmware version after any downgrade.
Added:
Web Mail users now can create a HTML email signature under Web Mail > Preferences > Account Settings. (Gmail-like version)
Under Mail Management > Configuration > Mail Signature, now you can create mail signatures for each domain name.
The password generator is newly added under Mail Management > Account Management > Individual.
Remote Backup feature is newly added which can shorten the downtime due to system failure.
The new type "CAA (Certification Authority Authorization)" is added under DNS Settings > Settings.
Under Monitoring > Event Log, the search results can be downloaded as a .txt file for future reference.
Under Monitoring > Failed Login IP, now you can unblock the IP by removing it from the record list.
Fixed :
The known system errors are fixed.
The security vulnerability of web mail is fixed: bypassing normal authentication and downloading suspicious files by using backdoors.